State — Filters the list of MAC addresses displayed according to the
■
type of MAC address configuration. Possible values are:
All — Displays all MAC addresses assigned to the port.
■
Static — Displays static MAC addresses assigned to the port.
■
Dynamic — Displays dynamic MAC addresses assigned to the port.
■
MAC Address — Displays MAC addresses currently listed in the MAC
■
address table, filtered by the selected value of the State field.
VLAN ID — Displays the VLAN ID associated with the port and MAC
■
address.
State — Displays the MAC address configuration method. Possible
■
values are:
Config Static — Indicates the MAC address is statically configured.
■
Config Dynamic — Indicates the MAC address is dynamically
■
configured.
Port Index — Indicates the port through which the address was
■
learned.
Aging Time — Indicates the amount of time the MAC address
■
remains in the Dynamic Address table before it is timed out if no
traffic from the source is detected. The default value is 300 seconds.
Configuring Address Tables
135