Defining Cos - 3Com OfficeConnect 3CDSG10PWR User Manual

164 C 13: C
HAPTER ONFIGURING

Defining CoS

Q S
UALITY OF ERVICE
The CoS Setup Page contains information for enabling QoS globally.
Monitor users have no access to this page.
To configure CoS Settings:
1 Click Device > QoS > CoS Setup. The CoS Setup Page opens:
Figure 78 CoS Setup Page
The CoS Setup Page contains the following fields:
QoS Mode — Specifies if QoS is enabled on the device. The possible
■
values are:
Disable — Disables QoS on the device.
■
Enable — Enables QoS on the device.
■
Select Port(s) — Selects the ports to be configured.
■
Set Default — Sets the default user priority. The possible field values
■
are 0-7, where 0 is the lowest and 7 is the highest priority.
Restore Default — Restores the device factory defaults for CoS
■
values.
2 Define the fields.
3 Click
updated.
. CoS is configured on the device, and the device is