Documentation - 3Com CoreBuilder 7000 Operation Manual

Documentation

Table 2 Text Conventions
Convention Description
Screen displays This typeface represents information as it appears on the
screen.
The word "syntax" means that you must evaluate the syntax
Syntax
provided and then supply the appropriate values for the
placeholders that appear in angle brackets. Example:
In this example, you must supply a port number for <port>.
The word "command" means that you must enter the
Commands
command exactly as shown and then press Return or Enter.
Commands appear in bold. Example:
The words "enter" When you see the word "enter" in this guide, you must type
and "type" something, and then press Return or Enter. Do not press
Return or Enter when an instruction simply says "type."
Keyboard key names If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+). Example:
Words in italics Italics are used to:






This section provides information about supporting documentation,
including:


CoreBuilder 7000 Family ATM Switch Documents


Related Documents
To enable RIPIP, use the following syntax:
SETDefault !<port> -RIPIP CONTrol =
Listen
To remove the IP address, enter the following command:
SETDefault !0 -IP NETaddr = 0.0.0.0
Press Ctrl+Alt+Del
Emphasize a point.
Denote a new term at the place where it is defined in the
text.
Identify menu names, menu commands, and software
button names. Examples:
From the Help menu, select Contents.
Click OK.
Documentation 15