Security; Chassis Management - Single Ip - 3Com CoreBuilder 7000 Operation Manual

Security

Chassis
Management —
Single IP
SNMP security is currently provided through configurable community
strings, one for Read and one for Write. The default community strings
are:
Read—"Public"
n
Write—"Private"
n
SNMP manager
Transcend ATM manager
ATM link
Ethernet link
Figure 60 SNMP Manager (Transcend ATM Manager)
The CoreBuilder 7000 family switch has a single IP address which serves
both the switch card and any CoreBuilder 7200, 7400, 7600 and 7800
interface cards installed in the CoreBuilder 7000 chassis.
The single-IP feature of version 4.0 is supported from version 5 of the
Transcend Enterprise Manager application. If you work with a previous
version of Transcend Enterprise Manager, you use the multiple-IP method.
A single IP has the following advantages:
Fewer IP address resources required
n
Simpler management by NMS
n
Unifies the chassis into one entity for management
n
The set of community strings for the SNMP agent of the switch card
n
serves the entire CoreBuilder 7000 chassis.
Chassis Management — Single IP
CoreBuilder 7000
In-band SNMP
Out-of-band SNMP
over UDP/IP
197