3Com 4210 Getting Started page 25

Mounting the front
bracket
Mounting the rear
bracket
Figure 17 Installing the switch in a 19-inch rack
Mount the front bracket as shown in Figure 18 and Figure 19.
Figure 18 Mount the front bracket to the device
Screw Screw
Figure 19 Mount the front bracket to the mount angel of the rack
Screw Screw
Front mount angle Front mount angle
The Switch 4210 26-Port does not need rear brackets. The description for
mounting rear brackets is only for the Switch 4210 PWR 24-Port.
Mount a screw on the back of the switch to closely connect the switch with the
rear bracket to support the switch. There are three positions for screw mounting
as shown in Figure 20.
Rack-Mounting the Switch
Front Front
bracket bracket
Front Front
bracket bracket
25