Table of Contents
Advertisement
16.0 - OPTICAL SIGNALS
System initializing
System
configuration OK
Satellite search
(with +15/54)
Satellite reception
indication
(with +15/54)
Weak GSM field (when
engine is turned off)
System arming
System armed
System disarming
17.0 - TECHNICAL SPECIFICATIONS
Nominal supply voltage
Nominal supply voltage range
Current absorption @ 12Vdc in stand-by
Operating temperature range
Engine block contact rating
The auxiliary negative input
LED will flash for
According to the required connection
approx. 30"
as indicated in the table below
LED steady ON for
max 20"
Every 5/7 seconds
12/24 Vdc
9 to 32
Vdc
Less than
10
mA
-20°C to +70°C
8A @ 20°C
18.0 -
AUXILIARY INPUT
(YELLOW/GREEN wire)
allows for many connections and configurations.
, program the input (by sending an SMS)
.
ATTENTION
!
The system is configured with the YELLOW/GREEN wire active 24/7,
negative input enabled to send generic alarm SMS to the 1st preset
number.
COMMAND
ACTIVATION
aux#password#0
Input active 24/7
Input only active
aux#password#1
when system is armed
aux#password#2
Input active 24/7
Input only active
aux#password#3
when system is armed
aux#password#4
System activation
aux#password#5
System activation
aux#password#6
System activation
aux#password#7
System activation
ATTENTION
!
Sending commands
aux#password#1
the system to forward an alarm message in case of ignition detection
(arming message must have been priorly sent, see par. 5.11 and 8.0.
CONFIGURATION
SIGNAL
Negative
Negative
Positive (lack of negative)
Positive (lack of negative)
Negative pulse activates the
system (60" arming delay),
negative pulse deactivates the
system
Positive pulse activates the system
(60" arming delay), positive pulse
deactivates the system
Continuous negative presence
actives the system (60" arming
delay), lack of negative deactivates
the system
Continuous lack of negative
activates the system (60" arming
delay), continuous negative
presence deactivates the system
and
aux#password#3
will program
Advertisement
Table of Contents
