Installation Preparation; Safety Recommendations - 3Com 3C17539 Installation Manual

Switch 8800 series
Hide thumbs Also See for 3C17539:
Table of Contents

Advertisement

3
Safety
Recommendations
General Safety
Recommendations
Safety
Recommendations
against Electricity
Safety
Recommendations in
Moving the Switch 8800
Family
I
NSTALLATION
To avoid possible bodily injury and device impairment, please read the following
safety recommendations carefully before installing the Switch 8800 Family. The
recommendations do not cover every possible hazardous condition.
The Switch 8800 Family use redundant PSUs. Turn off all PSUs and remove all
the power cords before opening the chassis.
Keep the chassis clean and dust-free.
Keep the chassis and installation tools away from walk areas.
Look carefully for possible hazards in your work area, such as ungrounded
power extension cables, missing safety grounds, and moist floors.
Locate the emergency power-off switch in the room before installation. Shut
the power off at once in case accident occurs.
Unplug all the power cords and external cables before moving the chassis.
Do not maintain the equipment alone when it has been powered.
Never assume but check each time that power has been disconnected from a
circuit.
Do not place the switch on a moist area and avoid liquid flowing into the
switch.
The Switch 8800 Family are rather big and heavy, so follow the recommendations
below when moving it.
Remove all the external cables (including power cords) before moving the
chassis.
Do not move the switch alone. Work with another person.
Move the switch slowly and stably. Never move suddenly or twist your body.
Move the switch at stable and consistent paces with your peer. Keep balance of
your body.
c
CAUTION: You can only hold the handles at both sides of the chassis when
moving the switch, but not the plastic panel of the chassis, the handle of the fan
frame, the handle of the PSUs or the air vents of chassis.
As these parts are not designed for bearing the weight of the entire chassis, any
attempt trying to carry the switch with these parts may impair the switch and even
injure yourself.
P
REPARATION

Advertisement

Table of Contents
loading

This manual is also suitable for:

Switch 8807Switch 8810Switch 8814

Table of Contents