Accessing The Script Configuration Page - 3Com OfficeConnect 3C8861 User Manual

Accessing the Script
Configuration Page
1 From the LAN Modem main page, click the Service Providers icon.
2 Choose the service provider for which you want to create or edit an existing
3 Click the Script button located at the bottom of the Service Provider Parameters
4 Click OK to enter the Script Configuration page.
You can associate a unique connection script for each of your four service provider
profiles. You enter the script via the LAN Modem's Script Configuration page.
To access the Script Configuration page, do the following.
The Service Provider Selection page opens.
connection script and click Select. If you are creating a new service provider,
choose New (Internet Service Provider) or New (Private Network) and click Select.
For instructions on creating or editing service provider profiles, refer to Chapter 6,
"Setting Up Additional Service Providers."
The Service Provider Parameters page opens. Review your parameters and make
changes if desired.
page to access the Script Configuration page.
A dialog box opens.
The Script Configuration page opens, as shown in Figure 43.
.
Figure 43 Script Configuration Page
Using a Connection Script 81