66
C
6: A
HAPTER
DVANCED
Editing Service
Provider Profiles
Restricting Access to
Service Providers
C
ONFIGURATION
To change the associations of this particular workstation, do the following.
1 Check or clear the boxes of the service providers you would like to associate or
disassociate.
2 Click Submit.
If you wish to password protect the configuration profile of the 56K LAN Modem,
refer to "Locking and Unlocking the Configuration."
The following steps allow you to edit a previously configured service provider
connection.
1 From the 56K LAN Modem main page, click the Service Providers image.
A drop-down list box appears which contains the names of your configured
service providers.
2 Select the name of the service provider connection profile you wish to edit.
The connection profile page appears.
3 Edit the fields as desired.
For more information on the particular fields, refer to the appropriate section,
"Setting Up a Connection to an ISP" or "Setting Up a Connection to a Private
Network", or refer to the online help located in the web page's bottom frame.
4 When finished, click Submit.
If you wish to restrict a computer(s) on the LAN from accessing a service
providers(s), do the following.
1 Click Workstation Parameters from the 56K LAN Modem home page.
2 Select the workstation for which you wish to limit access.
3 Clear the check boxes located next to the names of the computer(s) from which
you want to restrict service provider access.
4 When finished, click Submit.
5 Repeat steps 1 through 4 for additional service provider access restrictions.
If you wish to password protect the configuration profile of the 56K LAN Modem,
refer to "Locking and Unlocking the Configuration."