Table of Contents
Advertisement
2
Connection Types
56K Technology
LAN Side Connection
56K LAN M
F
UNCTIONALITY
This chapter provides a description of the 56K LAN Modem's key functionality,
covering the following topics.
Connection Types
Call Routing Protocol and IP Address Translation
Understanding PPTP
This section discusses LAN side and WAN side connections.
Your 56K LAN Modem utilizes the V.90 56K ITU standard, which is backward
compatible with all US Robotics 56K standards, and is capable of download
speeds of up to 56K
1
. V.90 technology takes advantage of the typical network
configuration found when an analog modem dials into a digitally connected
Internet Service Provider. Because it requires no analog-to-digital conversions in
the downstream path (which can cause line noise), V.90 can use nearly all of the
available 64K network bandwidth. (Upstream data, typically less speed sensitive,
travels at the standard V.34 rate.)
Further information is available in Appendix A of this User Guide, or visit the 56K
web site at
http://www.3com.com/56k
On the LAN side, up to four users can connect to the 56K LAN Modem's built in
Ethernet hub, or up to 25 users may connect to the 56K LAN Modem via an
external user-supplied hub, enabling users to share files and printers and to use
Internet email. An example of ten workstation connections is shown in Figure 3.
1.Capable of receiving at up to 56 Kbps and sending at up to 33.6 Kbps. Due to FCC regulations, re-
ceiving speeds limited to 53 Kbps. Actual speeds may vary. Requires compatible phone line and server
equipment. The 56K LAN Modem complies with the V.90 ITU standard and is backwards compatible
with all US Robotics 56K standards. Standard officially determined in February, 1998; ratification expect-
ed in September, 1998.
ODEM
D
ESCRIPTION
.
Advertisement
Table of Contents
