Switching The Tv/Video Screen Mode; Switching The Av Output; Switching To The Angle/Screen Control Screen; Turning The Monitor Picture Off - Kenwood KVT-M700 Instruction Manual

Monitor Control Function
FNC V.SEL MODE
yyy ;;;
Screen Mode
• NORMAL
;;; yyy
;;; yyy
• JUST
;;; yyy
;;;; yyyy
• CINEMA
;;;; yyyy
6
SCREEN
yyy ;;;
• FULL
yyy ;;;
;;;
• ZOOM
;;;

Switching the TV/Video Screen Mode

Press the [MODE] button.
Each time the button is pressed the screen mode
switches as follows:
Display Setting
"FULL" Full screen mode
"ZOOM" Zoom screen mode
"JUST" Just screen mode
"CINEMA" Cinema screen mode
"NORMAL" Normal screen mode
You cannot operate when the navigation picture is displayed.

Switching the AV Output

Press the [V.SEL] button for at least 1 second.
Each time the button is pressed for at least 1 second the
AV output switches as follows:
Display Setting
"VIDEO1" Picture/sound input from the AV IN 1
terminal
"VIDEO2" Picture/sound input from the AV IN 2
terminal
"TV" Picture/sound of the television
(During the KTC-V500E is connected)

Switching to the Angle/Screen Control Screen

Press the [SCREEN] button.
(☛ Page 7)

Turning the Monitor Picture Off

Press the [SCREEN] button for at least 1 second.
The picture reappears when the one of the SCREEN, MODE,
V.SEL or FNC buttons is pressed.