Table of Contents
Advertisement
The following messages are displayed when
certain problems are occurring in your system.
Take the recommended actions.
EJECT:
No disc magazine has been loaded in the
changer. The disc magazine is not completely
loaded.
E01
➪
Load the disc magazine properly.
No CD in the unit.
➪
Insert the CD.
NO DISC:
No disc has been loaded in the disc
magazine.
E02
➪
Load a disc into the disc magazine.
READ ERROR: No disc has been loaded in the disc
magazine.
E04
➪
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down.
The CD is scratched a lot.
➪
Clean the CD and load it correctly.
BLANK DISC: Nothing has been recorded on the MD.
NO TRACK DISC:No tracks are recorded on the MD, although it
has a title.
E11
NO PANEL:
The faceplate of the slave unit being
connected to this unit has been removed.
➪
Replace it.
E-77:
The unit is malfunctioning for some
reason.
E77
➪
Press the reset button on the unit. If the "E-
77" code does not disappear, consult your
nearest service center.
MECHA ERROR: Something is wrong with the disc magazine.
Or the unit is malfunctioning for some
reason.
E99
➪
Check the disc magazine. And then press
the reset button on the unit. If the "MECHA
ERROR" code does not disappear, consult
your nearest service center.
E-99:
The unit is malfunctioning for some
reason.
E99A
➪
Press the reset button on the unit. If the "E-
99" code does not disappear, consult your
nearest service center.
HOLD ERROR:The protective circuit in the unit activates
when the temperature inside the automatic
disc changer exceeds 60°C (140°F), stopping
all operation.
➪
Cool down the unit by opening the
windows or turning on the air conditioner.
As the temperature falls below 60°C
(140°F), the disc will start playing again.
NO NAME:
• Attempted to display SNPS during the
receiving session of the station having no
station name preset.
• Attempted to display DNPS during the CD
play having no disc names preset.
NO TITLE:
Attempted to display the disc title or track
title while the MD having no MD title is being
played.
NO TEXT:
• Attempted to display the disc text or track
text while the CD having no CD text is
being played.
• Attempted to display text during reception
of the station that isn't sending text
data.
E55
E10
E0d
E50
E51
E54
WAITING:
Radio text data is being received.
LOAD:
Discs are being exchanged in the Disc
changer.
E57
NO ACCESS: After setting it in the Disc Changer, Disc list
was done without having it been played at
least 1 time.
E56
E58
47
Hide quick links:
Advertisement
Table of Contents
