Advertisement
01. Replacing Dongles in the EM2100
Use the following procedure to remove and replace either the EM2100 FLOW License Dongle or the EM2100 Legacy
License Dongle in the EM2100. The EM2100 FLOW License Dongle uses a battery that has a lifespan of
approximately 5 years. Therefore, it is recommended to change the battery every 4 years. Contact the license
administrator to find out how old a dongle is.
CAUTION: ESD DAMAGE RISK. Protect the appliance from damage caused by electrostatic
discharge (ESD). Wear a grounded wrist or shoe strap whenever removing top cover from the
EM2100.
1. Locations
Parts and tools needed to replace dongles in EM2100 are:
2. Replacement Parts
EM2100 FLOW License Dongle (large black)
1
EM2100 Legacy License Dongle (small green)
2
3. Consumables
1
4. Necessary Tools
1
Phillips screwdriver
4
Part Name
Name
N/A
Name
P/N 18982-008 Rev A
Dongles inside of EM2100
Type
Quantity
14364-200F
1
13131-210F
1
No. 1
Image
Note
N/A
Note
FLOW Service Guide
Advertisement
