Advertisement
5. Replacing a failed EM2100
Step
Check Item
1
Remove dongles
from the failed
EM2100
2
Configure
EM2100
10
Following the procedure: Replacing Dongles in an EM2100 (pg. 3), remove the
EM2100 FLOW License Dongle and the EM2100 Legacy License Dongle from the
failed EM2100.Install the dongles into the new EM2100. The Licensening Dongles are
swapped so that entitlements don't need to be re-enabled.
In SNG go to the systems tab. Switch Unconfigured to the desired configuration in the pull-
down menu.
P/N 18982-008 Rev A
Task to be Performed
Check
□
□
FLOW Service Guide
Advertisement
