Table of Contents
Advertisement
Quick Links
USE AND CARE GUIDE
5-SHELF HEAVY-DUTY STORAGE UNIT
48 in. W x 24 in. D x 78 in. H
60 in. W x 24 in. D x 78 in. H
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-888-43-HUSKY
HUSKYTOOLS.COM
We appreciate the trust and confi dence you have placed in Husky through the purchase of this heavy-duty storage unit. We strive to continually
create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement
THANK YOU
needs. Thank you for choosing Husky!
Item #672-405
Model #MR482478W5
Item #672-141
Model #MR602478W5
Advertisement
Table of Contents
Related Manuals for Husky MR482478W5
Summary of Contents for Husky MR482478W5
- Page 1 THANK YOU We appreciate the trust and confi dence you have placed in Husky through the purchase of this heavy-duty storage unit. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement...
-
Page 2: Table Of Contents
GUARANTEED FOREVER If your Husky storage unit ever fails bring it back and we will replace it for free. This full warranty gives you specifi c rights which vary from state to state. If this product is defective contact the manufacturer for replacement parts. -
Page 3: Tools Required
TBE60SF Brace TBE24SF 24 in. Post UPT39SF 39 in. Wire Deck RWS2448SF 24 in. x 48 in. or 24 in. x 60 in. RWD2460SF Post Coupler MPC0409SF Post Cap RLPC Post Foot RLPF HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance. -
Page 4: Assembly Options
Assembly Options BEAM ORIENTATION OPTIONS This unit can be assembled by positioning the beams and braces in one of two different orientations and combinations: □ Beams and braces facing upwards □ Beams and braces facing downwards A rubber mallet should be used on the ledge of the beams and braces to properly seat the rivets. Beam side profile view Shelf Position (upwards) Tray Position (downwards) -
Page 5: Alternative Confi Guration
□ Place the post feet (G) on the bottom of each of the four lower posts (C). □ Check that the fl at surface of the beam (A) and brace (B) Post slot points down ledge is facing in the desired orientation. HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance. - Page 6 Assembly (continued) Assembling the bottom level □ Assemble one brace (B) to two lower posts (C) skipping one hole from the bottom of each post (C). □ Place the rivets on the braces (B) into the posts (C), and tap lightly to seat the rivets.
- Page 7 Completing the assembly □ Check each beam and brace connection to be sure that the rivets are properly seated. □ Place and fasten the post caps (F) to the top of each post (C). HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
- Page 8 Questions, problems, missing parts? Before returning to the store, call the Husky Customer Service 8 a.m.-6 p.m., EST, Monday-Friday 1-888-43-HUSKY HUSKYTOOLS.COM Retain this manual for future use.