Specifications - Kodak Pageant Manual

Specifications

Projector (with cover)
Speaker unit
(Case cover)
Arc projector power
supply unit
Power Service Required:
105- to 125-volt, 60-cycle ac., 3-wire grounded outlet
Maximum Power Consumed:
700 watts
Projection Lamp:
The lamp supplied is a General Electric Marc-300/16A
(300-watt); it requires a high-voltage/low-energy
starting pulse (furnished by the power supply unit);
the color temperature is 5000K, and the rated life is 25
hours.
Amplifier (completely transistorized):
Rating (IHFM Specifications A-200)­
Music Power: 25 watts
Sensitivity: lmv. film channel (equalized)
lOmv. microphone channel
300mv. phono channel
Distortion: 2% maximum
Frequency Response: 40 to 18,000 CPS± 3db
Hum and Noise: -50db with open circuit input
Speaker:
11 x 6-inch oval, PM, 16-ohm voice coil
Exciter Lamp:
ASA Code BSK, 6-volt, 1-amp., T-5 bulb, single-contact,
medium pre-focused base
Sound Pick-Up:
Silicon Solar Cell
2
Approx.
Length
Width Height Weight
in. in.
in. lbs.
11½ 12¾ 1 5 ¼ 4 0 ½
1 3 ½
12¾ 6 ¼
6%
12 16¼ 26 ½
5¼