Using The Menus; Setup Using The Setting Display; The Image Adjustment Menu - Toshiba TLP-X100U Owner's Manual

Using the menus

You can call up on-screen menus, and conduct a number of adjustments and settings using
the MENU button on the control panel (main unit side) and remote control.
p.16

Setup using the Setting display

■
The menu shown below is for operation instructions purposes and might differ from the
actual display.
1. Press the MENU button
Display the Setting display menu.
2. Select a Category
Select a category by using .
There are following 5 categories:
Image adjustment menu p.35
Display setting menu p.37
Default setting 1 menu p.40
Default setting 2 menu p.41
Status display menu p.42
3. Adjustments & Settings
Press
Item
Adjustment/Setting Value
These marks signify
the items can be
adjusted/set by using
.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
• The figure shows displays given for operation instructions purposes. As the display may differ depending on the item,
refer to the following applicable pages for the menu item you desire.
• To return to previous item, press the RETURN button.
4. End Press the MENU button once more.
(The menu will disappear automatically after 30 seconds, if no operation is conducted.)
Displays the current
adjustments and
settings of selected
category.
Item shown with gray
cannot be adjusted with
the current input source.
or to open the menu.
These marks signify
that there are setting
These marks
screens. Press
signify that there
are options. to display a list of
Press or setting screens.
to display a list of
options.
* When no item is
changed, press
Toggle items with .
Select items with and press .
Fix selection with .
34

The image adjustment menu

■
Use this menu to set or adjust image-related items. Items that can be set or adjusted
are marked "Yes", and those that cannot are marked "No". (When an item is masked, it
indicates that you cannot select for the current input.)
Item
Adjust the image contrast.
Contrast
Adjust the brightness of the image.
Brightness
Adjust the color of the image.
Color
Adjust the sharpness of the image.
Sharpness
Noise Set the function to reduce screen noise.
reduction *1
On (Enable)
Press
Picture
mode with
Adjust red of the image color.
R-level
Less red
Adjust green of the image color.
G-level
Less green
Adjust blue of the image color.
B-level
Less blue
*2 Set the black level with
NTSC mode
US
JAPAN : NTSC (JAPAN) mode
Auto setting Automatically adjusts items such as
the sampling phase depending on the
or
type of input signal.
Position Press
Adjust to eliminate flicker.
.
Adjust to eliminate periodic patterns
and flickering when many fine vertical
lines appear on the screen.
Adjust the horizontal position of the
image.
Description Computer Y/P
Yes
Lower Higher
Yes
Darker Brighter
No
Lighter Deeper
Yes
Softer Sharper
No
Off (Disable)
. Toggle the picture mode
Yes
. 1/2/3
Yes
More red
Yes
More green
Yes
More blue
.
: NTSC (US) mode No
Yes
then change mode using
Yes
and adjust with
Phase
Yes
Frequency
Yes
H-position
Yes
35
/P Video S-video
B R
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
No Yes Yes
No No No
No No No
No No No
No No No
No No No