Toshiba TLP-X100U Owner's Manual page 20

Using the menus (Continued)
Detailed description
[Screen size]
• Normal : Enlarge an input image to fit the screen without changing the aspect
ratio of video signals.
• Full : Displays an input image in 104 × 768 dot resolution by enlarging it to
fill the entire screen. (X100)
Displays an input image in 180 x 800 dot resolution by enlarging it to
fill the entire screen. (WX100)
• Thru : Displays an input image in the native resolution of the video signals. Thru
display is not available for Y/P
The larger image than the screen size will be displayed over the
screen. The input image may appear vertically long with some
frequencies of video signals.
• Wide : Displays an input image in the center of the screen with a 16:9 aspect
(X100)
ratio by enlarging it to fit the width of the screen. The upper and lower
portions of the image will be compressed.
Wide display is not available for Computer-input images.
• 4:3 zoom : Displays an input image with a 4: aspect ratio by enlarging it
(WX100)
vertically. The enlarged image will be displayed over the screen. 4:
zoom display is not available for computer images.
• For Y/P /P input, screen size setting function is not available for the video signals
B R
with a 16:9 aspect ratio.
Note
• If you use the screen size setting function on commercial video software, broadcast
or cable-broadcasting programs to display images with the varying aspect ratio
except for the purpose of your private viewing and listening, it may infringe the
copyright protected by the copyright laws.
[Up/down shift]
Shifts the projected image vertically when [Screen size] is [Wide] for X100.
Shifts the projected image vertically when [Screen size] is [4:3 zoom] for WX100.
[Blackboard mode]
Projects the image in colors more like projecting on a screen.
Precaution
• The projected image may differ depending on the type, color, and material of the
blackboard and wall even if the selected color is the same as the projected screens.
[Background]
• TOSHIBA is set for [Logo] by factory setting.
• If user's logo has been registered, it is displayed when [Logo] is set for background.
[Start-up screen]
If user's logo has been registered and this setting is [On], the logo is displayed at start-up.
[User logo]
Registers a part of the image that is input from computer, as a stationary picture and
displays it as a logo at start-up and when no signal is input.
/P , Video and S-Video-input images.
B R
8
<Logo registration>
How to register user logo
1 Project a picture to register.
2 Select [User logo] in the Display setting menu, and press the
button.
3 Select <Logo registration> from the displayed menu list and press
the button.
4 The registration area is displayed for confirmation. Select [OK]
and press the button.
• If the registered picture does not fall within the display area, operate the
computer to scroll the screen.
5
Select [Yes] to register and press the
6
Registration starts.
• A message is displayed while registration is in process.
Notes
• You can register a logo when the input is set to Computer.
• The area that can be registered is 51 x 84 dots for X100 and 640 x 400 dots for
WX100, at the center of the screen. To register a company logo, prepare the image
within the limit.
• Only one logo can be registered. When a new image is registered, the old one is
erased.
• The time needed to register or display the image varies depending on the data size.
• If you use this function on commercial video software, broadcast or cable-
broadcasting except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
<Display style>
Select the size of the registered logo.
: Displays the registered image in original size at center of the screen.
: Displays the registered image by enlarging fully in the screen.
(As processed digitally, the image quality is degraded.)
<Background>
Sets background color when [Center] is selected for the logo [Display style].
<Logo confirmation>
You can preview the registered logo.
<Reset logo>
You can reset the registered logo, display style and background to the factory
setting. (The logo set for the start-up screen and background is reset.)
9
or
button.