Using The Menus - Toshiba TDP-TW300U Service Manual

Using the Menus

You can call up on-screen menus, and conduct a number of adjustments and settings using the operation
buttons on the control panel (main unit side) and remote controller.
n How to use the menus
The menu shown below is for operation instructions purposes and might differ from the actual display.
1. Press the MENU button
2. Select a Category
Select a category by using
There are following five categories:
Image adjustment menu
Display setting menu
Default setting menu
Control setting menu
Status display menu
3. Adjustments & Settings
Item
Adjustment/Setting Value
+16
Brightness +16 +12
Standard
+16
These marks signify
+16
the items can be
+16
adjusted/set by using
Execute
30
.
+64
+64
+32
255
255
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it by
pressing .
The figure shows displays given for operation instructions purposes.
As the display may differ depending on the item, use the following pages as a reference.
4. Back RETURN button
5. Press the MENU button
6. End Press the MENU button or RETURN button.
(The menu disappears 30 seconds after the last operation.)
Display the Setting display menu.
.
Image adjustment
Contrast
Brightness
Picture mode
R-level
G-level
B-level
Auto setting
Phase
Frequency
H-position
V-position
Clamp 1
Clamp 2
To image adjustment menu
Press to open the menu.
or
Language English
On
On
These marks
On
signify that there
are options.
Press
to display a list of
options.
Toggle items with
Select items with
Fix selection with
The Setting display (2) is displayed.
1-4
Chapter 1
Displays the current
adjustments and settings
of selected category.
+12
Item shown with gray
+12
Bright
cannot be adjusted with
+12
+12 the current input source.
+12
+12
+12
+12
+12
+12
+12
Off
Off
On
Manual
Low
Standard
1
or
Key lock
Yes
* When no item is
changed, press
.
and press
.
These marks
signify that
there are setting
screens. Press
or to
display a list of
setting screens
Off
.
.