Assembly - Invacare Rea Assist Manual

1.
A
2.
3a.
REA® ASSIST

Assembly

When you receive your wheelchair, you must fi t the
backrest, armrests and legrests onto the chair. The
assembly is simple and does not require any tools.
1. Backrest
The backrest is fitted onto the wheelchair by
feeding the shafts (A) of the backrest onto the
tubes of the chair (B). Ensure that you push
the backrest down as far as possible. Secure
C
into place by tightening the knobs (C).
Secure the backrest pad using the Velcro strips.
B
2. Armrests
The armrests are fitted onto the wheelchair by
pushing them down into their attachments on the
edge of the chair seat.
3. Legrests/footrests
The wheelchair can be equipped with either
legrests or footrests.
3a Legrests
Attach the legrests by pushing the tube at the upper
part of the legrests down into the tubes on the
wheelchair. You must angle the legrests outwards
when inserting them.
Lock the legrests by turning them inwards. The
legrests are automatically locked so there is no
risk of them coming off the wheelchair.
Now check that the backrest is secured
firmly in position!
9