Toshiba RD-KX50SU Owner's Manual page 47

Notes
• When a Reservation disc (
recorder, you cannot check the remaining volume of other
discs.
• The nearest 8 programs are calculated at a time.
• While the recorder is preparing for or executing a
programmed recording, any program modification cannot
be registered. Only programs which will start after 5
minutes or later can be modified.
• Available disc volume is not displayed for a DVD-R disc on
which DVD-Video finalize process was executed.
To stop a programmed recording
To finish,
Press on the front panel twice.
When you press it once, a message appears. While
the message is displayed, press
To pause recording,
Press on the front panel.
To resume recording, press it again.
Turning the power off automatically after
completing programmed recording
1) While executing programmed recording, press
QUICK MENU.
Quick Menu appears.
2) Press / to select "Auto power off" then
press ENTER.
Keeping the power on even after the
programmed recording finished
If the recorder turns itself on to execute a programmed
recording, it will turn itself off after finishing the
recording. You can restrict this and keep the recorder
powered on.
1) While executing programmed recording, press
QUICK MENU.
2) Press / to select "Continuous power on"
then press ENTER.
page 51) is inserted in the
button once again.
Delaying the end time of programmed recording
while it is recording
While a programmed recording is in progress,
press EXTEND.
The first press displays the programmed end time (in
the front panel display).
Each time you press the button, it is delayed 10
minutes, up to 60 minutes.
Notes
• Pressing a button except EXTEND in the above procedure
will set the currently selected delay.
• You cannot delay the end time of a programmed recording
which will end within 1 minute from the current time.
• Even if you delay the end time of a programmed recording,
the recording will stop when the disc is exhausted. Also it
will stop if 9 hours elapsed.
47