Toshiba RD-KX50SU Owner's Manual page 37

To stop recording
Press STOP.
To pause recording (to omit an unnecessary
portion)
During recording, press PAUSE.
To resume recording, press it again.
Note
• Pausing recording automatically creates a new chapter
division at that point.
To change a TV channel to be recorded
1) During recording, press PAUSE.
Recording pauses.
2) Press CH or the number buttons to change the
channel.
3) Press PAUSE to resume recording.
To view a TV program while recording another
1) Start recording on this recorder.
2) On a connected TV, select the TV mode.
3) Using the channel selector of the TV, select a
desired channel on the TV.
To reduce noise on recordings (Rec DNR)
Before recording, set "Rec DNR" (
To record and play at the same time
Note
• During a dubbing job, the unoccupied drive is available for
recording or playback, however, cannot perform a function
which records and plays simultaneously.
To set an end time of a recording which is in
progress
1) During recording, press QUICK MENU.
2) Press
3) Press
4) Press ENTER.
Notes
• By setting an end time, it is memorized as a programmed
one, and the
page 162).
illuminates to indicate that t he recorder holds a timer
program of recording.
• The programmed end time must be set for 5 minutes later
than the current time.
To start recording while playing a disc
Stop playback, then select the other disc by
pressing HDD or DVD button, and start recording
on that disc.
To play a disc while recording on another disc
Select the disc that is not being recorded by
pressing HDD or DVD button, and start playback on
the disc.
Quick Menu appears.
/ to select "End time" then press
ENTER .
The display changes as follows:
e.g.
2 : 13 pm
End time
/ to select an item then press
ADJUST to change the value.
indicator in the front panel display
37