Toshiba RD-KX50SU Owner's Manual page 128

Editing
Creating a DVD-Video using DVD-R (Continued)
Notes
• The number of titles that you can write on a DVD-R disc is
limited (99 titles. Each title should have 99 chapters or
less). If you have a large number of titles or chapters, you
may not be able to write due to the limitation of the DVD
specifications. Also, even if the number of titles and
chapters is within the limit, you may not be able to write if
you have a large number of menu items.
• Due to standard differences, the number of chapters and
their position may change slightly after DVD-Video
creation. (For chapters generated on a DVD-R disc, the
same thumbnail for the Original chapter is displayed.)
• Due to standard limitation, a DVD-R disc may contain
unnecessary scenes after creation.
• If you select items of various types of video outputs, aspect
ratios or other properties, or if you select an item recorded
with different settings, they may be divided into titles. (For
titles generated on a DVD-R disc the same thumbnail for
the Original title is displayed).
• Content based on a complicated PlayList or composed of
too many items may not be copied properly.
• Copy-once permitted contents cannot be copied to a
DVD-R disc, even if they are recorded onto the HDD while
"DVD compatible mode" is set to "Main" or "SAP" (
162).
• Content recorded on a recorder other than this recorder
(including TOSHIBA products) cannot be copied to a DVD-
R disc using High Speed Dubbing. First set "DVD
compatible mode" to "Main" or "SAP" and record them onto
the HDD. Then perform "Rate conversion dubbing"
( page 112) to copy to the HDD.
• When a content is recorded with manual rate 1.4 Mbps and
is including a 16:9 picture shape scene, the DVD creation
of the content may failure. In this case, set "Set Aspect
Ratio" to "4:3 fixed" on the menu "(Option Settings)".
• Even if the title is recorded with "DVD compatible mode" set
to "Main" or "SAP", using a recorder other than this may
cause failure when recording to a DVD-R disc.
• If the DVD-R creating fails to be completed, most of the
discs cannot be used again.
• If an error occurs while a DVD-Video is created, the error
code "ERR- " ( indicates the error code) is shown in
** **
the front panel display of the recorder. (
clear this display, press DISPLAY button.
• There may be a difference between a specified thumbnail
of menu in the DVD-Video creation procedure and the one
on displayed in CONTENT MENU.
128
Selecting the items displayed on the menu
You can hide items on the menu if necessary.
To hide a disc name
To hide a page number
To hide a disc name and show a page number
To hide a title/chapter name
page
To hide a title/chapter name and show a time
Note
• You cannot hide items other than above.
page 169) To
Leave "Disc Name" blank. Display the on-screen
keyboard and press CLEAR button to delete letters,
then press button to save.
Leave "Disc Name" blank. Follow the above
method.
Enter one more space in "Disc Name".
On CONTENT MENU or a display of item selection,
select a title/chapter and display the
on-screen keyboard from Quick Menu. Erase all
characters of the name.
You can hide a time also using the same manner.
• "Chapter 0001" . . . on CONTENT MENU means
that the chapter is given no characters as its
name. Such a chapter does not show the name
on the menu.
• A chapter menu shows the title name at the top
right corner. If you hide the title name, no
character appears in this area.
Enter one more space and save it as the title/
chapter name.