Removing A Disc; Disc Playback Reminders - Toshiba 24V4210U User Manual

Higher quality picture:
High resolution pictures on some discs may occasionally cause
noise on the picture display. If this is the case, reduce the
Sharpness setting under the Picture Settings menu.
NOTE
This indicates the kind of disc that can employ the function
described under that heading.
❖
DVD: You can use this function with DVDs.
❖
VCD: You can use this function with Video CDs.
❖
CD: You can use this function with Audio CDs and CD-R/RW
discs.

Removing a disc

1 Press the EJECT button on the TV control panel or on the
remote control.
2 Wait for the disc to be ejected and then remove the disc from
the slot.

Disc playback reminders

❖
If the LED TV/DVD combination does not operate properly,
static electricity build-up may be the cause. Turn off the LED
TV/DVD combination, then disconnect the power cord from
the AC outlet. Reconnect the power cord, then press the
POWER button to turn on the LED TV/DVD combination
again.
❖
If an incompatible disc is loaded, one of the following error
messages appears on-screen: "Incorrect Disc," "Wrong
Region," or "Please Enter Pws." If this is the case, check your
disc again.
❖
In some instances the LED TV/DVD combination may take a
few minutes to start disc playback.
❖
Keep your fingers well clear of the disc slot when a disc is
loading or unloading. Failure to do so may cause serious
personal injury.
❖
Do not move the TV during playback. Doing so may damage the
disc.
❖
When a disc is inserted when the TV is not in DVD mode, the TV
will automatically switch to DVD mode.
Basic Disc Playback
Disc playback
121