Setting The Hdmi® Audio Mode - Toshiba 24V4210U User Manual

2 Press the ( /
be locked, and then press the OK button. Enter your four-digit
PIN code.
A check appears in the box. To remove the check, press the OK
button again.
NOTE
3 To save the setting, press the EXIT button.
To manually add digital sub-channels on a physical channel:
Use the Channel Numbers and the Dash/100 button on the remote
control to enter the channel number (for example, 56–1). If the
channel is found, the number will be added to the list and the box
will be unchecked.
If the channel is not found, a message appears.
NOTE
To remove encrypted channels from the channel memory:
If an encrypted channel is accidentally added to the channel list
while programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel surfing.
When you tune to an encrypted channel, the following message
appears.
(Sample Illustration) Removing an encrypted channel
Press the 1 button while the message is displayed to remove the
unnecessary channel from the channel list.
Setting the HDMI
To set the HDMI
1 Press the MENU button to open the Sound menu.
2 Highlight Audio Setup, and then press the OK button.
Setting the HDMI® audio mode
arrow) buttons to select a channel position to
If the PIN code has not been set yet, a warning message appears.
Skipped channels cannot be selected with the CH Up/Down arrow)
buttons; however, they can be accessed using the number keys on
the remote control.
®
audio mode
®
audio mode:
Setting up your TV
55