Toshiba 24V4210U User Manual page 111

Other HDMI® CEC functions
When the Enable HDMI® CEC and each item in the
HDMI® CEC Setup menu are set to On, the following functions
will be enabled.
Item: Description:
TV Auto Input If a connected HDMI
Switch automatically switch to the appropriate HDMI
TV Auto Power If a HDMI® CEC device is turned on, the TV turns on automatically.
Device Auto If the TV is turned off the TV will send a message to turn off all of the
Standby HDMI® CEC devices connected to the TV.
Speaker From this item, you can set your audio output preference to the TV speakers
Preference or the audio receiver speakers. When this item is set to Audio Receiver, the
TV remote can be used to adjust or mute the volume of the audio. This item
will be grayed out unless a HDMI® CEC compatible audio receiver is
connected.
NOTE
To set the HDMI® CEC Setup:
1 From the Setup menu, highlight HDMI® CEC Setup and
press the OK button.
2 Press the ( /
HDMI® CEC.
3 Press the ( /
NOTE
4 Press the ( /
Setup item you wish to use, and press then press the ( /
arrow) buttons to select On or the desired mode.
❖
❖
❖
❖
®
device starts playing video or audio, the TV will
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver's speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
arrow) buttons to highlight Enable
arrow) buttons to select On.
If you select Enable HDMI® CEC Off, the other items will be grayed
out.
arrow) buttons to highlight the HDMI® CEC
TV Auto Input Switch: On/Off
TV Auto Power: On/Off
Device Auto Standby: On/Off
Speaker Preference: TV Speakers/Audio Receiver
Using the TV's features
Using HDMI® CEC
®
input.
111