Chapter 5
Setting up your TV
Initial Setup
When you first turn on or reset the TV, the Initial Setup window
will appear.
1
In the Menu Language field, press the ( /
2
Press the ( /
set your desired time zone, using the ( /
then press the OK button.
The Location settings window appears.
3
For normal home use, press the ( /
Home, and then press the OK button.
The ANT/CABLE In setup window appears.
4
Press the ( /
(Cable or Antenna), then press the OK button.
5
Press the OK button to select Start Scan and continue with the
Auto Tuning.
You can stop the Initial Setup by pressing the EXIT button.
However if you do not finish the entire Initial Setup process and
press the POWER button before starting the auto tuning steps, the
Initial Setup window will appear every time you turn on the TV.
50
arrow) buttons to select Time Zone Setup and
arrow) buttons to select the input source
arrow) buttons.
arrow) buttons, and
arrow) buttons to select