Led Indications; Troubleshooting - Toshiba 62HM196 User Manual

HM196_EN.book Page 80 Tuesday, May 30, 2006 2:18 PM

LED indications

The yellow, blue, and red/green LED lights on the TV (at the bottom center of the TV) indicate the TV's status, as described below.
Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow
LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.
TV Front
LAMP
POWER
TIMER
LED Indication
1) Blue is ON (solid).
2) Yellow blinks.
3) Blue is ON (solid).
Yellow blinks.
4) Yellow is ON
(solid). Red blinks.
5) Yellow is ON
(solid).
6) Red blinks.
7) Blue is ON (solid).
Green blinks.
8) Blue blinks slowly.
9) Blue blinks quickly.
10)Blue blinks quickly.
Red blinks.
11)Blue blinks quickly.
Yellow blinks.
Red blinks.
If, after trying the solution, the problem still exists:
In the U.S., call TACP Consumer Solutions at 1-800-631-3811.
•
In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click
•
"Home Entertainment," and then click "Support."
80
Chapter 8: Troubleshooting
Yellow LED
Blue LED
REC
Red/Green LED
Condition
The TV is operating
–
properly.
In LPS mode (standby
See "Setting the Quick Restart
with Quick Restart ON).
The lamp is not working The TV will automatically try to restart itself eight times
properly. (see item #4).
Note: If the TV is powered off and then quickly on again
when the lamp unit is hot, it may take several minutes
for the picture to appear on-screen. This is a property of
DLP TV lamp technology and is NOT a sign of
malfunction. For details, see "Setting the Quick
Restart
HOT LAMP RESTART" (- page 30).
The lamp is not working Turn the TV OFF and then ON again. If the problem
properly after the eighth persists, contact Consumer Solutions at
automatic restart (see 1-800-631-3811.
item #3).
The lamp unit door is not Turn OFF the TV and unplug the power cord. Review
seated properly. "Lamp unit replacement and care" in Chapter 9 to
ensure that the lamp door is installed securely.
Fan stopped
(light engine).
Fan stopped (POD).
Abnormal operation of Turn OFF the TV and unplug the power cord. Plug the
BUS line. power cord in again and turn ON the TV.
Power Protect
Detection.
The color wheel has
stopped.
An abnormal Turn OFF the TV. Check to make sure none of the slots
temperature increase or openings in the TV cabinet are covered, blocked, or
has occurred. dusty. Turn ON the TV again.
"Voice announce" feature
When certain non-standard conditions occur, the LEDs
on the TV will blink and the TV will play a recorded
"voice announcement" describing the condition (see the
table below for the specific conditions that include a voice
announcement).
To repeat the voice announcement and hear additional
information, press the MENU button on the TV while the
LEDs are blinking.
Solution
™
feature" (- page 30).
™
feature" and "IMPORTANT NOTICE ABOUT
Voice
Announce
–
–
–
"Lamp not
working"
"Lamp door is
open."
"Fan
stopped."
–
–
–
"Color wheel
stopped."
"Temperature
warning."
HM196 (E/F) Web 213:276