Switching Between Two Channels Using Channel Return; Switching Between Two Channels Using Surflock; Hm196 (E/F) Web 213:276 - Toshiba 62HM196 User Manual

HM196_EN.book Page 36 Tuesday, May 30, 2006 2:18 PM
Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number
buttons (and the dash (=) button if selecting a digital
channel).
Press R on the remote control. The previous channel
3
will display. Each time you press R, the TV will switch
back and forth between the last two channels that were
tuned.
Note: If you press R from a non-antenna input, the TV
will return to the last-viewed ANT input and channel.
36
Chapter 5: Using the TV's features
Switching between two channels using
SurfLock
The SurfLock
in the R button, so you can return to that channel quickly
from any other channel by pressing R.
To memorize a channel in the R button:
1
Tune the TV to the channel you want to program into the
R button.
Press and hold R for about 2 seconds until the message
2
"Channel Memorized" appears on-screen. The channel
has been programmed into the R button.
3
You can then change channels repeatedly, and when you
press R, the memorized channel will be tuned.
The TV will return to the memorized channel one time only.
Once you press R and then change channels again, the
CH RTN memory will be cleared and the button will function
as Channel Return, by switching back and forth between the
last two channels that are tuned.
™
™ feature temporarily "memorizes" one channel

HM196 (E/F) Web 213:276