Chapter 6: Using The Tv's Advanced Features; Using The Advanced Picture Settings Features; Using Dynamic Contrast; Using Cableclear ® Digital Noise Reduction - Toshiba 62HM196 User Manual

HM196_EN.book Page 54 Tuesday, May 30, 2006 2:18 PM

Chapter 6: Using the TV's advanced features

Using the advanced picture settings
features

Using dynamic contrast

When dynamic contrast is set to On, the TV will detect
changes in the picture quality that affect the appearance of your
contrast settings and then automatically adjust the video.
To select dynamic contrast preferences:
Press Y and open the Video menu.
1
Highlight Advanced Picture Settings and press T.
2
Video
Picture Settings
Advanced Picture Settings
Theater Settings
Navigate ENTER
3
In the Dynamic Contrast field, select either On or Off.
\
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Lamp Mode
Game Mode
Color Management
Reset
To save the new settings, highlight Done and press T.
4
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select the Movie picture mode and then
set the dynamic contrast to On, the picture mode will
automatically change to Preference in the Picture
Settings menu (- page 42).
54
Select CH RTN Back EXIT Exit
ANT 1
On
Auto
Low
Cool
Low Power
Off
Done
Using CableClear ® digital noise reduction
®
The CableClear digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To change the CableClear settings:
Press Y and open the Video menu.
1
Highlight Advanced Picture Settings and press T.
2
3
In the CableClear field, select your desired setting.
Advanced Picture Settings
Dynamic Contrast
CableClear
MPEG Noise Reduction
Color Temperature
Lamp Mode
Game Mode
Reset
Note:
• If the current input is ANT 1, ANT 2, VIDEO 1, or
VIDEO 2, the menu will display the text "CableClear."
The available selections are Off, Low, Middle, High,
and Auto.
• If the current input is ColorStream HD1, ColorStream
HD2, or HDMI, the menu will display the text "DNR." The
available selections are Off, Low, Middle, High, and
Auto. Auto will react proportionally to the strength of
the noise. Low, Middle, and High will reduce the noise
in varying degrees, from lowest to highest, respectively.
To save the new settings, highlight Done and press T.
4
To revert to the factory defaults, highlight Reset and
press T.
ANT 1
On
Auto
Low
Cool
Low Power
Off
Done

HM196 (E/F) Web 213:276