Troubleshooting - Cateye PADRONE DIGITAL CC-PA400B Manual

Troubleshooting

PADRONE DIGITAL: Measurement does not work
The PADRONE DIGITAL does not switch to the measurement screen.
What should I do?
•
Is flashing on the PADRONE DIGITAL?
The PADRONE DIGITAL is connected to the Cateye Cycling™ app.
Set [Connect] to OFF from the Cateye Cycling™ app or close Cateye Cycling™
app.
Why is the sensor signal not being received?
•
If the Cateye Cycling™ app has been using, does [Connect] being set to ON?
Set [Connect] to [OFF] or close Cateye Cycling™ app.
•
Are you using another smartphone application that is connecting to the
Bluetooth® sensor?
The Bluetooth® sensor may be connected to the smartphone.
Bluetooth® sensors are only able to connect with a single device at a time.
Stop using all other apps or change the app settings so that it does not connect
to Bluetooth® sensors.
•
Turn off Bluetooth® on your smartphone, as the sensor may be connected to the
smartphone.
Confirm that the sensor gets connected with the PADRONE DIGITAL.
* It is recommended that Bluetooth® is turned off on your smartphone when the
sensor disconnects easily.
•
Are you also using other wireless devices simultaneously (including other
Bluetooth® products)?
Stop using the devices simultaneously and confirm that the connection is
restored.
•
Press the RESET button on the sensor that cannot connect.
Confirm that the sensor gets connected with the PADRONE DIGITAL.
46
Cover,
Appendix
Introduction
Using the unit
Using the app
SET
Appendix
1
2
3
4
5
4/8