Installing A Processor Card - Nortel Versalar 15000 Installing And Maintaining

Installing and Maintaining the Versalar Switch Router 15000

Installing a Processor Card

You can install a processor card with the power on or off.
Caution: Electrostatic discharge can damage hardware. Attach the antistatic
wrist strap before handling any Versalar 15000 components.
To install a processor card:
Attach the antistatic wrist strap.
1.
For instructions, see
Locate the slot where you want to install the processor card
2.
Remove the air flow module.
3.
4-8
"Attaching the Antistatic Wrist Strap" on page 4-3.
(Figure 4-5).
308684-B Rev 00