Installing The Latch Rod; Assembling The Bagger Top - Toro 60in Bagger Kit Operator's Manual

Figure 9
1. Draw bar decal
6. Install the bent, flared end of a rod into the keyed
slot in the left side of the machine frame, and
move the rod rearward to seat it in the frame
(Figure 10).
Note:
Repeat this step for the right side of the
machine.
Figure 10
Left side shown
1. Pivot frame hole
2. Washer
3. Hairpin cotter
7. Insert the bent ends of the rods into the
attachment mount as shown in
secure the end of each rod with a washer and
hairpin cotter.
g203562
g203565
4. Support rod
5. Keyed slot (existing)
6. Bent, flared end of rod
Figure 10 and
4

Installing the Latch Rod

Parts needed for this procedure:
1 Latch rod
1 Hairpin cotter
Procedure
Install the latch rod with a hairpin cotter
1. Hairpin cotter
5

Assembling the Bagger Top

Parts needed for this procedure:
1 Bagger top
1 Bagger screen
Procedure
1. Turn the bagger top over.
2. Install the screen as shown in
it slopes down toward the collection bags.
9
(Figure
Figure 11
2. Latch rod
Figure 12
11).
g202360
and that