Removing The Bagger; Using The Draw Bar - Toro 60in Bagger Kit Operator's Manual

8. After you remove the obstruction, install the
complete bagger system and resume operation.

Removing the Bagger

CAUTION
Failing to remove the front bagger weights
and operating the machine without the bagger
attachment may cause an unstable condition,
which could result in a loss of control.
• Always remove the front weights when
removing the bagger attachment.
• Never operate the machine without the
bagger attachment and the front weights
installed.
You can remove the bagger by repeating the Setup
sections from all installed bagger related kits in
reverse order. If weights are installed, always remove
the front bagger weights when removing the bagger
attachments.
Note:
It is necessary only to remove the cutoff baffle
when installing a mulching kit.

Using the Draw Bar

The bagger support bracket has a draw bar feature
that you can use for towing.
•
Read and understand all the operating instructions
of the machine.
•
When turning, slow down and observe the
clearance.
•
Make wide turns and keep towed equipment clear
of the towing vehicle.
•
The maximum draw bar pull is 36 kg (80 lb).
•
Excessive draw bar pull may cause hydrostatic
transmission failure.
1. Bagger support bracket with draw bar
15
Figure 23
g203567