HDD Protection Utility
The HDD Protection utility controls your computer's hard disk
drive (HDD) protection feature, which parks the HDD whenever
motion is detected on the computer. Using this utility, you can
enable or disable hard disk drive (HDD) protection, and set the
motion detector's sensitivity level for AC power and battery power
operation.
To use the HDD Protection utility:
1
Click Start, All Programs, Toshiba, Utilities, then
HDD Protection Settings.
The HDD Protection Properties window appears.
(Sample Image) HDD Protection Properties window
2
Select ON to enable HDD protection, or select OFF to disable
HDD protection.
3
Set the battery and AC power detection levels as desired.
4
Click OK.
Toshiba Utilities
HDD Protection Utility
145