Table of Contents
Advertisement
124
Exploring Your Computer's Features
Setting up for communications
Setting up the connection
To set up an office connection, consult your network administrator
for network settings and additional considerations.
To set up a dial-up connection, use the Connect to the Internet
Wizard:
1
Click Start, Control Panel, Network and Internet, and then
Connect to the Internet.
2
Click Dial Up.
3
Enter the phone number of your network connection.
4
Click Connect and let the program dial the number.
The computer connects to the network.
How to disable the Ethernet LAN port
When your computer starts, Windows
Dynamic Host Configuration Protocol (DHCP) server. If the
computer is not connected to a network, it may pause a few minutes
as it waits for a reply. To avoid this delay, you can reconfigure
Windows
To disable the LAN port:
1
Click Start, Control Panel, and then double-click System.
2
Click Device Manager under Tasks on the left side of the
window.
3
Select the appropriate network adapter.
4
Click Action, Properties.
5
Select the Driver tab.
6
Click Disable.
7
Click Yes.
8
Click OK.
Your LAN port is now disabled.
To enable the Ethernet LAN port, repeat steps one through four.
Select the Driver tab, then click Enable Device, Next, Finish, and
then Close.
®
to disable the LAN port.
®
attempts to contact a
Advertisement
Table of Contents
