Toro Groundsmaster 4500-D Operator's Manual page 21

Viewing and Changing the Protected Menu Settings
1. In the Protected Menu, scroll down to Protect
Settings.
2. To view and change the settings without entering
a PIN code, use the right button to change the
Protect Settings to O
3. To view and change the settings with a PIN
code, use the left button to select O
PIN code, and turn the key to the O
and then to the O
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle
time between Off, 8S, 10S, 15S, 20S, and 30S.
Setting the Maximum Allowed Mow Speed
1. In the Settings Menu, scroll down to Mow Speed
and press the right button.
2. Use the right button to increase the maximum
mow speed in 5% increments between 50% and
100%.
3. Use the center button to decrease the maximum
mow speed in 5% increments between 50% and
100%.
4. Press the left button to exit.
Setting the Maximum Allowed Transport Speed
1. In the Settings Menu, scroll down to Transport
Speed and press the right button.
2. Use the right button to increase the maximum
transport speed in 5% increments between 50%
and 100%.
3. Use the center button to decrease the maximum
transport speed in 5% increments between 50%
and 100%.
4. Press the left button to exit.
Turning the Smart Power ON/OFF
1. In the settings menu, scroll down to Smart
Power.
2. Press the right button to switch between O
O .
FF
3. Press the left button to exit.
Setting the Counterbalance
1. In the Settings Menu, scroll down to Counter
Balance and press the right button.
2. Press the right button to switch between Low,
Med, and High.
.
FF
, set the
N
position
FF
position.
N
When finished with the Protected Menu, press the left
button to exit to the Main Menu, then press the left
button to exit to the Run Menu.
Actuating Turnaround ON/OFF
1. In the Settings Menu, scroll down to Turnaround.
2. Press the right button to switch between O
O .
FF
3. Press the left button to exit.
Viewing the Fuel Consumption Rate
You can view the average fuel consumption rate for
the lifetime of the machine in the Service Menu.
and
N
21
and
N