Toro Groundsmaster 4500-D Operator's Manual page 19

Using the Menus
To access the InfoCenter menu system, press the
menu access button while at the main screen. This
brings you to the main menu. Refer to the following
tables for an overview of the options available from
the menus:
Main Menu—Menu Item
Faults
Service
Diagnostics
Settings
About
Service—Menu Item
Hours
Counts
DPF Regeneration
Inhibit Regen
Parked Regen
Last Regen
Recover Regen
Description
Contains a list of the recent
machine faults; refer to the
Service Manual for more
information.
Contains information on the
machine such as hours of use
and other similar numbers
Lists various states that the
machine currently has; you
can use this to troubleshoot
certain issues as it quickly tells
you which machine controls
are on and which are off.
Allows you to customize and
modify configuration variables
on the InfoCenter display
Lists the model number, serial
number, and software version
of your machine
Description
Lists the total number of hours
that the machine, engine, and
fan have been on, as well
as the number of hours the
machine has been transported
and overheated
Lists the number of starts,
cutting unit/PTO cycles, and
fan reversals the machine has
experienced
The diesel particulate filter
regeneration option and DPF
submenus
Use to control reset
regeneration
Use to initiate a parked
regeneration
Lists the number hours since
the last reset, parked, or
recovery regeneration
Use to initiate a recovery
regeneration
Diagnostics—Menu Item
Left Cutting Unit
Center Cutting Unit
Right Cutting Unit
Traction
HI/LO Range
PTO
Engine
Cruise
Settings—Menu Item
Units
Language
LCD Backlight
LCD Contrast
Protected Menus
Protect Settings
Auto Idle
Mow Speed
Trans. Speed
Smart Power
Counterbalance
Turnaround
*Only "operator-faced" text is translated. Faults,
Service, and Diagnostics screens are "service-faced."
Titles are in the selected language, but menu items
are in English.
Protected under Protected Menus—accessible only
by entering PIN
19
Description
Refer to the Service Manual
or your authorized Toro
distributor for more information
on the Engine Run menu and
the information contained
there.
Description
Controls the units used on the
InfoCenter (English or Metric)
Controls the language used
on the InfoCenter*
Controls the brightness of the
LCD display
Controls the contrast of the
LCD display
Allows a person authorized
by your company with the
PIN code to access protected
menus.
Allows the ability to change
the settings in the protected
settings
Controls the amount of time
allowed before idling the
engine when the machine is
not in use
Controls the maximum speed
while in mow (low range)
Controls the maximum speed
while in transport (high range)
Turns Smart Power on and off
Controls the amount of
counterbalance applied by the
cutting units
Turns Turnaround on and off