Toro Groundsmaster 4500-D Operator's Manual page 17

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics and other information about the machine
(Figure 14). There is a splash screen and main
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen at any time by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
Figure 14
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can
use it to exit any menu that you are currently using.
•
Middle Button—use this button to scroll down
menus.
•
Right Button—use this button to open a menu
where a right arrow indicates additional content.
•
Beeper—activated when lowering the cutting units
or for advisories and faults.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
g020650
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
17
Indicates when scheduled service
should be performed
Hours remaining until service
Reset the service hours
The status of the engine rpm
Info icon
Maximum traction speed setting
Fast
Slow
The fan is reversed
Stationary regeneration is required
The air-intake heater is active
Raise the left cutting unit.
Raise the center cutting unit
Raise the right cutting unit
The operator must sit in the seat
The parking brake is engaged
The range is high
Neutral
Identifies the range as Low
Coolant temperature (°C or °F)
Temperature (hot)
Traction or Traction Pedal
Not allowed