D Term With Hotel Function - NEC NEAX2400 IMX Features Manual

D-105D
D-105D
General Description
This feature allows the users of 16-button or 24-button D
programmable line/feature keys in the same manner as the keys of the Hotel Console. Fifteen programmable feature
keys are assigned to the Front Desk Terminal to provide full hospitality functionality.
AUTOMATIC WAKE-UP
DO NOT DISTURB
ROOM CUTOFF
MESSAGE WAITING
CHECK-IN/CHECKOUT
ROOM STATUS
AUDIT REPORTS
Also required are the ENT (Enter), CE (Clear) and END (Exit) feature keys.
Note:
The RECALL key will function as an "END" key.
Operating Procedure
The Front Desk Terminal may be operated either in the idle condition or connected to the guest station.
For DO NOT DISTURB [D-11], ROOM CUTOFF [R-9], CHECK-IN/CHECKOUT [C-23]
Idle Condition:
•
Step
Press the specific function's set or reset key.
1
Enter the guest station number.
2
Press the ENT key.
3
Press the END key.
4
Press the CE key to clear an entry such as a wrong
5
station number.
Connected to a guest station (DIRECT SERVICE SET/RESET [D-25]):
•
Step
Press the specific function's set or reset key.
1
Press the ENT key.
2
Press the END key.
3
Page 68
term
D With Hotel Function
term
D With Hotel Function
Action
Action
term
to control the following services by operating
[A-10] Set/Reset (WUS/WUR)
[D-11] Set/Reset (DDS/DDR)
[R-9] Set/Reset (RCS/RCR)
[M-6] Set/Reset (MWS/MWR)
[C-23] (C/I/C/O)
[R-10] Display (STS)
[A-26] (AUD)
Result
The LCD shows the feature abbreviation.
Result
The LCD shows the feature abbreviation.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2