NEC NEAX2400 IMX Features Manual page 87

Service Conditions (cont'd)
c.) When the individual telephone number of the double suite room is called, only that telephone
rings.
4. When all the telephones of the double suite room are rung simultaneously, the call is connected to the first
telephone which answers. When the call is answered, other telephones stop ringing.
5. Each of the telephones in the double suite room can originate the call independently.
6. When the stations that belong to the double suite room are accommodated in the same line circuit, the
ringers ring simultaneously.
7. The message waiting lamps of the eight stations are controlled simultaneously.
8. The number displayed on the Console is the primary station number of the primary suite room, and if the
phantom number is assigned, the phantom number will be displayed.
9. The interface to PMS is controlled by the primary station of the double suite room. However, the billing
text will be sent for each telephone number.
10. CONNECTING ROOM SERVICE [C-72] is not available when this service is activated.
term
11. When a D
term
a.) The D
b.) MULTIPLE LINE OPERATION – D
term
c.) The D
d.) The master station number of the double suite room must be assigned as the my line number of
term
the D
12. When a few D
lines are assigned to the D
a.) An incoming call cannot be answered by using the virtual stations (sub lines) of the double suite
room.
b.) The maximum number of telephone circuits that can be accommodated in a double suite room is
eight circuits.
c.) The Service Conditions of SUITE ROOM SERVICE [S-75] also apply to DOUBLE SUITE
ROOM.
NEAX2400 IMX Hotel Features and Specifications
NDA-24245, Issue 2
Double Suite Room
is used in the double suite room:
must have the my line.
should be designated as the master station of the double suite room.
.
term
s and a few analog telephones (up to 8) are used in the double suite room and virtual
term
s:
term
[M-20D] service is available.
D-150
Page 75