Setup; Unfolding The Handle - Toro 20340 Operator's Manual

132-4470
Traction Adjustment
1. Attention; read the
Operator's Manual—1)
Loosen the knob by turning
it counterclockwise; 2) Pull
the cable(s) away from
the engine to decrease
the traction, or push the
cable(s) toward the engine
to increase the traction;
3) Tighten the knob by
turning it clockwise.
133-8198
1. Warning—read the Operator's Manual; 1) Add fuel up to the
indicated level. 2) Tip the mower forward for storage.
decal132-4470
2. Scan the QR code for
more information on
traction adjustment.
decal133-8198

Setup

Important: Remove and discard the protective plastic
sheet that covers the engine and any other plastic or
wrapping on the machine.
1

Unfolding the Handle

No Parts Required
Procedure
WARNING
Unfolding the handle improperly can damage the
cables, causing an unsafe operating condition.
• Do not damage the cable(s) when folding or
unfolding the handle.
• Ensure that the cable(s) are routed to the outside
of the handle.
• If a cable is damaged, contact an Authorized
Service Dealer.
1. Disengage the handle locks
2. Move the handle rearward to the operating position
(Figure 3).
4
(Figure 3).