Table of Contents
Advertisement
Sample removing the memory module
4
Replace the memory module slot cover and tighten the
screw.
5
Turn the computer over and restart it.
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
Checking total memory
When you add or remove a memory module, you can check
that the computer has recognized the change. To do this:
1
Click Start, Control Panel, Performance and
Maintenance, and then System.
2
The General tab view automatically appears and shows
total memory.
If the computer does not recognize the memory
configuration, turn off the computer, remove the memory slot
cover, and make sure the memory module is seated properly,
as described in step
page
55.
13
of
"Installing a memory module" on
Getting Started
Adding memory
61
Advertisement
Table of Contents
