Table of Contents
Advertisement
13
Gently press down on the memory module connector
until the clips snap into place.
clip
Sample pressing down on the memory module connector until
the clips snap into place
Do not force the memory module into position. The memory
module should be completely inserted into the socket and
level when secured in place.
The clips on either side of the memory module snap into place
when the memory module is properly inserted.
14
Replace the memory module slot cover and tighten the
screw.
15
Turn the computer over and restart it.
TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.
You can now continue setting up the computer. When the
operating system has loaded, you can verify that the
computer has recognized the additional memory module.
If you are adding an extra memory module after setting up the
computer, verify that the computer has recognized it correctly
as described in
"Checking total memory" on page
Getting Started
Adding memory
clip
59
61.
Advertisement
Table of Contents
