Table of Contents
Advertisement
To use any of these methods, you first need to enable them in
Toshiba's Power Saver utility.
1
Click Start, Control Panel, Performance and
Maintenance, and then Toshiba Power Saver.
2
Click the Setup Action tab.
3
Select Standby for the options you want.
❖
❖
4
Click Apply.
5
Click OK.
NOTE
Starting again from Standby mode
To start up the computer from Standby mode, press the power
button until the on/off light changes to green. The computer
returns to the screen you were using.
If you put the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
Toshiba's online resources
Toshiba maintains a number of online sites to which you can
connect. These sites provide information about Toshiba
products, give help with technical questions and keep you up
to date with future upgrades. For more information, see
"Contacting Toshiba" on page
When I press the power button
Set this option to Standby to put the computer into
Standby mode when you press the power button.
When I close the lid
Set this option to Standby to put the computer into
Standby mode when you close the display panel.
For more information about the Power Saver utility, see
"TOSHIBA Power Saver" on page
Learning the Basics
Toshiba's online resources
147.
205.
103
Advertisement
Table of Contents
