Table of Contents
Advertisement
60
Getting Started
Setting up your computer
Installing additional memory (optional)
Your computer comes with enough memory to run most of
today's popular applications. You may want to increase the
computer's memory if you use complex software or process
large amounts of data.
There are two memory slots. Your system may have both
slots occupied.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
If the computer is on, begin at step 1; otherwise, skip to step
3.
1
If the computer is on, click Start, Turn Off Computer.
The Turn off computer window appears.
2
Click Turn Off.
The operating system turns off the computer.
3
Unplug and remove any cables connected to the
computer.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
To avoid damaging the computer's screws, use a standard
Phillips no. 1 screwdriver that is in good condition.
Do not install or remove a memory module while the DVD-
ROM drive power is on.
Advertisement
Table of Contents
