Table of Contents
Advertisement
2
Plug the other end of the RJ11 telephone cable into the
modular jack of a standard voice-grade telephone line.
Connecting your computer to a network
You can connect your computer to a network locally or
remotely.
Locally, using the built-in 10/100 Ethernet LAN adapter
by connecting it to a standard RJ45 LAN line.
Remotely, using the built-in modem and a dial-up
connection.
To set up the network connection, use the Network Setup
Wizard:
1
Click Start and point to All Programs.
2
Point to Accessories, then to Communications, and
click Network Setup Wizard.
3
Follow the on-screen instructions.
The computer connects with the network.
Powering down the computer
When you power down the computer, you have a number of
options to choose from:
Turn Off or Shut down, which power off the computer
Hibernation, which saves the current operating state to
the hard disk and powers off the computer
Stand by, which saves the current operating state to
memory and enters a low power mode
Restart, which restarts the computer
Learning the Basics
Powering down the computer
105
Advertisement
Table of Contents
