Table of Contents
Advertisement
262
If Something Goes Wrong
Problems when you turn on the computer
6
Save the file and refer to it when you contact the software
manufacturer.
Problems when you turn on the computer
These problems may occur when you turn on the power.
The computer will not start.
Make sure you attached the AC adapter and power cable
properly or installed a charged battery.
Press and hold down the power button for a few seconds.
If you are using the AC adapter, check that the wall outlet is
working by plugging in another device, such as a lamp.
The computer starts but, when you press a key, nothing
happens.
You are probably in Stand by mode and have a software or
resource conflict. When this happens, turning the power on
returns you to the problem instead of restarting the system.
To clear the condition, press
Clearing the condition may get the computer running, but it
won't solve a resource conflict. Read the documentation that
came with the conflicting device and
conflict" on page
The computer is not accessing the hard disk or the
external diskette drive.
Your computer normally loads the operating system from the
hard disk. If you have a hard disk problem, you will not be
able to start the computer. Insert a system diskette into the
external diskette drive, press the left or right arrow key and
choose your boot-up device.
266.
HINT: Press F12 as you power on the computer to access the
menu.
,
, and
Ctrl
Alt
Del
"Resolving a hardware
simultaneously.
Advertisement
Table of Contents
