Instant password security
+
Fn
Without a password
The Fn + F1 key combination turns off the display and
activates instant security. Using the pointing device or any
key will make the display reappear. For information on
setting, see
With a password
The Fn + F1 key combination turns off the display and
activates instant security. Type either a user or supervisor
password and press
If you set a blank screen saver, pressing the Fn + F1 key
combination to activate instant security will cause the screen
to go blank. Moving the pointing device or pressing a key
turns the screen back on. An "Unlock Computer" window
appears, prompting you for a password. After typing in the
password, press
To activate the password feature:
1
Click Start, Control Panel.
2
Click Appearances and Themes
3
Click one of the following:
This hot key blanks the display.
"Activating the power-on password" on page
Enter
.
Enter
To activate the password feature, you must first enable it by
using Toshiba Hardware Setup. Refer to
Setup" on page
258.
Choose a screen saver in the Pick a task section
Display in the or pick a Control Panel icon section
The Display Properties window appears.
Instant password security
.
289
Hot Keys
"Toshiba Hardware
72.