Stihl KombiTool HT-KM 4182 Instruction Manual page 5

STIHL recommends the use of STIHL
original tools, guide bars, saw chains,
chain sprockets and accessories. They
are specifically designed to match the
product and meet your performance
requirements.
Never attempt to modify your power tool
in any way since this may increase the
risk of personal injury. STIHL excludes
all liability for personal injury and
damage to property caused while using
unauthorized attachments.
Do not use a high-pressure washer to
clean the power tool. The solid jet of
water may damage parts of the unit.
Clothing and equipment
Wear proper protective clothing and
equipment.
Clothing must be sturdy
but allow complete free-
dom of movement. Wear
snug-fitting clothing, e.g.
an overall and jacket
combination, do not wear
a work coat.
Do not wear clothing which could
become trapped in wood, brush or
moving parts of the machine. Do not
wear a scarf, necktie or jewelry. Tie up
and confine long hair above your
shoulders.
Wear cut protection
safety boots with non-slip
soles and steel toe caps.
HT-KM
WARNING
To reduce the risk of eye
injuries, wear close-fit-
ting safety glasses in
accordance with Euro-
pean Standard EN 166.
Make sure the safety
glasses are a snug fit.
Wear "personal" sound protection, e.g.
ear defenders.
Wear a safety hard hat where there is a
danger of head injuries from falling
objects.
Wear sturdy protective
gloves made of a resist-
ant material (e. g.
leather).
STIHL can supply a comprehensive
range of personal protective equipment.
Transporting the machine
Always stop the engine.
Always fit the chain scabbard – even
when you carry the power tool for short
distances.
Ensure that the power tool is always well
balanced and hold it by the shaft for
carrying.
Do not touch hot parts of the machine -
risk of burn injury!
By vehicle: When transporting in a
vehicle, properly secure your machine to
prevent turnover, damage and fuel
spillage.
Before starting
Check that your power tool is properly
assembled and in good condition – refer
to appropriate chapters in the
KombiEngine and KombiTool user
manuals.
Correctly mounted guide bar
–
Correctly tensioned saw chain
–
Never attempt to modify the controls
–
or safety devices
Keep the handles dry and clean –
–
free from oil and dirt – this is
important for safe control of the
machine
Adjust carrying harness and
–
handles in accordance with body
height. Observe the chapter "Fitting
the Harness"
To reduce the risk of personal injury, do
not operate your power tool if it is
damaged or not properly assembled!
To prepare for emergencies when using
a harness: Practice setting down the
machine quickly. To avoid damage, do
not throw the machine to the ground
when practicing.
English
3